BESTLUB S P H is a general purpose circulating and hydraulic oil made from highly refined base oil with rust, oxidation and foam inhibitors to get best lubrication characteristics. BESTLUB S P H has long service life and is used for hydraulic systems. These oils are also used for compressor crank case lubrication but are not recommended for lubrication of turbines and equipment having silver coated components. BESTLUB S P H has Vickers V-104 C Vane pump test and meets IS 10522-1993 and IPSS 1-09 - 022 specifications. These are available in ISO - VG specifications 32, 46, 68, 100, 220. However ISO - VG specifications 22, 57, 121, 150, 176 can be made available as per customer demand.
Application
BESTLUB S P H are recommended for non-turbine circulation systems and stationary, mobile hydraulic systems operating under moderate pressures. Particularly were long service life of the fluid is desired. Other applications for BESTLUB S P H are machine tools, Industrial spindles, Compressors and general lubrication where a rust and oxidation inhibitors are required
Performance
BESTLUB S P H has long service life with good wear protection, rapid water separation, minimum foaming and effective rust protection programs.
Typical Properties
Grade
32
46
68
100
220
Viscosity cst @40oC
32
46
68
100
220
V.I (MIN)
90
90
90
90
90
Flash (Min) oC
160
180
200
220
220
RUST TEST (D 66 5 A)
pass
pass
pass
pass
pass
Note:
The parameters are subjected to changes as and when required at the discretion of the company. The values given in the tables of properties are typical values and are meant for general guidance only.
