| |
 |
| |
| Description |
|
| BESTLUB Rustol 132, 142 is a mineral oil based rust preventive oil. Rustol D W is low flash Dewatering type rust preventive oil. |
|
| |
| Rustol 132, 142 |
|
| Rustol 132, 142 are a homogeneous and unique combination of highly powerful and very effective rust preventives and rust inhibitors along with highly refined high Viscosity index base oils. This package contains a special rust inhibitor, which gives a high degree of rust protection for a long duration. Rustol 132 has a shorter protection time than the 142 grades. |
|
| The product offers a rust preventive uniform film on the surface of the metal, which remains till it is removed by vapor degreasing technique or solvents. |
|
|
| Rustol D W |
|
Rustol D W is a homogeneous combination of very powerful and highly effective rust inhibitors and rust preventive oil. It is a dewatering type, solvent based rust preventives. It meets IS 1154-1967 and IS 1674-1960 specifications in all respects and more salt spray corrosion test for a very long duration. The product on application on the metal surfaces displaces water leaving an oily film, which has remarkable anti-rust properties. It has a excellent spread ability and can be applied by dipping or spraying. The protective film is removable by wiping or alkali degreasing.
|
|
| |
| Typical properties are specified over leaf |
|
| |
Rustol 142 |
Rusto 132 |
| Appearance |
Clear |
|
| Density @ 29.5 deg C |
0.8795 (Typ) |
0.8795 (Typ) |
| Kinematic Viscosity @ 40 deg C |
36 CST |
35 min |
| Flash Point COC deg C |
190 min |
190 min |
| Coverage sq.m/litre |
100 min |
100 min |
| Film Thickness |
7-8 microns |
7-8 microns |
| Protection |
a. indoors |
|
| |
b. Outdoors |
|
|
|
| Humidity cabinet test @ 95 deg for 360 hrs |
Passes |
Passes |
|
|
|
| |
| |
Rustol DW |
| Appearance |
Clear |
| Flash Point deg C (Abel) |
40 min |
| Water Displacement Properties |
Passes |
| Emulsifying Properties, vol ml separated |
| 60 ml in 15 min |
|
| 75 ml in 25min |
|
| Stability |
Passes |
| Protection against corrosion in emulsion |
Passes |
| Copper Strip Corrosion for 3 hrs @ 50 deg C |
ASTM 1a |
Protection against corrosion under continuous
Condensation conditions at high temperature
and high humidity for 180 hrs |
Passes |
| Drainage Test - % Loss in Mass |
5 |
| Coverage –sqmt / litre |
45-55 |
| Film Thickness, microns |
4-6 |
| Salt Spray Corrosion for 72 hrs |
Passes |
| Protection |
1. indoors |
|
| |
2. Outdoors |
|
| 6 months min |
|
| 2 months min |
|
|
|
| |
| Note: |
|
| The parameters are subjected to changes as and when required at the discretion of the company. The values given in the tables of properties are typical values and are meant for general guidance only. |
 |
